Author Topic: Tempestus Scion W.I.P (Read 737 times)

The forgotten · « **on:** November 09, 2022, 07:31:00 PM »

Been a very long time since ive done anything Warhammer related since my DKOK years back, this is just a start edit on my 3d files of the Scion model to fit my 3d avatar in armor smith designer.

This would be a long build due to fitting it in with my mechanic's job....but lets see how it gets on shall we

The forgotten · « **Reply #1 on:** November 19, 2022, 02:52:00 PM »

so workload increased with not just laying out the Tempestus Scion but also a laser scanned 30k Solar auxilia Trooper however the sorting out of the file has been somewhat more challenging being hi res poly count and trying to reduce that but also keeping as much detail as i can.

The forgotten · « **Reply #2 on:** May 10, 2023, 09:08:57 PM »

built the basic helmet ready looking into finding a decent match for the lenses and looking to build into the helmet mic and Bluetooth system

The forgotten · « **Reply #3 on:** May 15, 2023, 10:15:34 AM »

Another day another update ....got the shoulder plates made and helmet has now got lenses however they are only temporary till I can make some custom deeply curved light up ones but shouldn't be long till have the main torso made and see what I got to do for the uniform to match 👀.

(for photos please see attached pics below)

The forgotten · « **Reply #4 on:** May 29, 2023, 09:28:10 PM »

New progress (30/05/2023), completed building the chest armor and nearly finished building the back pack which will also house my two power packs to power fans,leds, voice changer and possibly a mini smoke machine to come out of side vents on gun and charging cell backpack

The forgotten · « **Reply #5 on:** June 01, 2023, 09:03:11 PM »

got the fitment of the chest plate piece sitting where i want it on me by raising it abit higher and adding thickness to shoulder touching points by +20mm (total thickness 30mm), backpack now fixed onto the back with pipping into the chest Armor showing within the art being now added also.

The forgotten · « **Reply #6 on:** July 06, 2023, 02:40:42 AM »

Got the best matching uniform for this and with some padding I got most of the gear sitting right on me .

Now that Im some what happy with the what's been built so far Im now moving on to do the arm and leg armour and finally get the gun linked to the back pack and built the scope for it .

The forgotten · « **Reply #7 on:** July 23, 2023, 11:53:41 AM »

well the build has gathered some speed and ive been able to add the the following:

- USB RGB shoulder flood lamp built into left shoulder with a custom lense which will need tinting as lowest setting is too bright still

- made the knee + elbow pads

- 4 power bank supply fitted with two usb ports for additional electrical gizmos

- rivets attached as art work and figures show

- one of two wrist+arm armor made

- added the skull require for the rear power pack

- power pack power lines to the hot shot rifle created and fitted

- rear bump stock for rifle made and fitted

still looking for a stone colour grade army sleeping bag to place on the back pack but if local shops dont have such will have to make it myself.

still need to build the other arm and both lower leg armor. been looking to add a wireless monitor to the wrist armor but i cant find anything within the 5 inch screen size i got to work with as 7" is too big.

Too be continued