gfxgfx
 
Please login or register.

Login with username, password and session length
 
gfx gfx
gfxgfx
 
Welcome to the Obscurus Crusade!
To use the Pepakura File Library you must be logged in.
 
gfx gfx
gfx
49407 Posts in 2562 Topics by 5472 Members - Latest Member: ob1knoche February 24, 2020, 04:10:35 AM
*
gfx* Home | Help | Login | Register | gfx
gfx
Obscurus Crusade  |  Costuming  |  Space Marines  |  Brother Lucien joins the ranks of the Deathwing (WIP)
gfx
gfxgfx
 

Author Topic: Brother Lucien joins the ranks of the Deathwing (WIP)  (Read 6578 times)

0 Members and 1 Guest are viewing this topic.

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #180 on: January 31, 2020, 09:55:16 PM »
Todays progress as follows
https://photos.app.goo.gl/YSfVGUuN7DWHzn3D6

https://photos.app.goo.gl/NbzV8HWyC8m6u3RJ7

https://photos.app.goo.gl/tHnoBEkDncMmtvz2A

https://photos.app.goo.gl/7Syh5qdVVMtauGgT8

https://photos.app.goo.gl/FB7Xfo2DJXHZUNDT6
This is just preliminary wash at the moment. The good stuff is still to come. Still have some black on the vents and coolant valves yet, but you get the idea. This next pic is just for shiggles
https://photos.app.goo.gl/EMkUByFDBn9Cjr9q8
It was setting on the countertop amongst a bunch of other parts awaiting paint. Hope you like it, stay tuned for more...
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #181 on: February 01, 2020, 09:00:02 PM »
Made some good headway today,
https://photos.app.goo.gl/tRoiEfoLh5M2Tp1o6
Got all the corrugated tubes on and the sensors installed and here with the helmet
https://photos.app.goo.gl/VPXFg3Q4FLbkkvQD7

Here's some other details that got finished
https://photos.app.goo.gl/Cjmr6DNgXXY7b48n8

https://photos.app.goo.gl/AcgWbSeRa77icTtH6
Alot of this still needs to get grunged around the outside yet.
Last but not least... I had to see
https://photos.app.goo.gl/azRaqAqsjMH9RCACA

https://photos.app.goo.gl/ZYEuKArQDdWjhHrCA

https://photos.app.goo.gl/4A5XV6KbCQkaQVsF9

https://photos.app.goo.gl/Zr4rbCBGVJiCoJydA
As you can kinda see in the last pic his shoulder comes up almost even with the top of his body. He looks bigger now with paint than he did before! I have a few small items left to install yet then it's all paint for the body and apothecary gear( his light and servo head "Bob"). Keep watching, there's still lots more to come
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #182 on: February 02, 2020, 08:43:36 PM »
Let there be light in the dark corridors of the space hulk's. Got his auxiliary light done today.
https://photos.app.goo.gl/E5ADTGLDMeGhhyCR7

https://photos.app.goo.gl/3AtsHvdxLp9NDJBx8

https://photos.app.goo.gl/tUeKHNxMXXTMbrzk8
And 1 with the lights out
https://photos.app.goo.gl/L3QkTGxJNnWZhxtr6
This thing is pretty bright for an LED flashlight. I got it at Harbor freight for $10 I think. I gutted it out and mounted it all inside some cardboard tube. I used the plastic Christmas ornaments for the front lense and rigged a simple on/off switch mounted in the side like what's in the lightning claws. This piece bolts onto his body at the mounting pylons on his back. That way both pieces of gear can get swapped out for the cyclone rocket launcher. Lots more to come so stay tuned and Thanx for watching.
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #183 on: February 04, 2020, 09:09:32 PM »
Servo "Bob" joins us tonight, say hello Bob
https://photos.app.goo.gl/8wQH7L2EJb7E9axZ7

https://photos.app.goo.gl/TYZw2vkqTTE89sMp9

https://photos.app.goo.gl/BDM6zbtohkEBowkk7

https://photos.app.goo.gl/b5rJmLDHJP1n4Pba6
Put some batteries in for looks
https://photos.app.goo.gl/ima66nZZPu3Abant9

https://photos.app.goo.gl/NKimMBV4hunevwJi9
And 1 in the dark with the aux light
https://photos.app.goo.gl/xRDUJat5Z7vHtAjf7
I have 1 more aux light that I'm going to finish that mounts to the hood on the side. I think that all together with Bob and the round aux light it'll be too much. I think it was on 1 of the different apothecary skins or 1 of the other armor varients, can't remember at the moment. I made that 1 1st before deciding on a flat out apothecary. Stay tuned, lots more on the way
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #184 on: February 06, 2020, 08:47:28 PM »
The grungey eagle has landed. Finished this tonight
https://photos.app.goo.gl/WFk24J2fnERqSY1P9

https://photos.app.goo.gl/dC4k71sqTQchxv2a9

https://photos.app.goo.gl/yKU6A1AQUpaDP5ND8

https://photos.app.goo.gl/z6WZnF6MxSqE6YfG8
Also got some done around the rim under his neck
https://photos.app.goo.gl/eTJyW6JdAc6hGv258
The back by the vents is pretty much finished and have just a few more spots I'd like to hit with some weathering. His upper body is almost done then it's the biceps and elbows. I've already tried a small test area on the helmet to see if it will cover alright and it will. I still think I need to cut a hole in his snout so I can see a little bit. I'm almost blind looking out. I'm thinking of covering it with screen or a coarse mesh. Don't know about that yet. Stay tuned for more and Thanx for watching.
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #185 on: February 08, 2020, 09:09:08 PM »
Helmet progress for today. I've been trying to fiigure what I could use to cover the hole in his nose. I didn't want to use straight up door screen, kinda cheesy and not to my liking. Then I found some coarse stainless steel mesh on eBay and thought about that for a minute. I wound up finding some tool box drawer liner from Meijers that looked way better.Heres the progression
Hole in the face
https://photos.app.goo.gl/xx1fWJYFCoBJS1H66

https://photos.app.goo.gl/xfeGUHmqsriMzzbq9
From the inside
https://photos.app.goo.gl/SiouYHbcL41MdsEp7
And a couple teasers with 1st coats of paint
https://photos.app.goo.gl/eheUiuhN38mqrg5G7

https://photos.app.goo.gl/fQPxeRwH7fpnD8xJ9
You can see in the last pic that the drawer liner stuff doesn't seem too bad, like it could be a filter or some such. Anyway, I can see quite well now. Looking through the side vents and the nose gives me a pretty good sight line in front of me. The eyes are a little high and won't be of much use. They'll get mirrored orange lenses (snow board goggle lenses). Don't know if I can make them light up, they're tinted and nothing shines through. But his augmetic sensor has 2 sets of LED's that will light up so that'll have to do. As always, Stay tuned and Thanx for watching
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #186 on: February 09, 2020, 08:50:39 PM »
Got his body finished tonight!!
https://photos.app.goo.gl/26BAkJCPQixJkNpd8

https://photos.app.goo.gl/EsLrJdtVXgjKGnXp6

https://photos.app.goo.gl/VikznqYEHCjfZNCJ7

https://photos.app.goo.gl/SQsf9opT8uVyybx68

https://photos.app.goo.gl/GrVa78XTz8WUE4uC7

https://photos.app.goo.gl/1VmuY2r9bRXerAEo8
One thing that I did add on were these little things. They're some aluminum slugs with threaded snaps on 1 end
https://photos.app.goo.gl/FkNoLr2BPYD16qXPA
The purpose is to have something to snap a tabard to near the top of his cowl. I have plans for 1 that goes with 1 of his belt buckles. It will snap here and get tucked behind the buckle like the screen shots in the game. They got mounted here
https://photos.app.goo.gl/vnjJjQqnrAoutgfu9

https://photos.app.goo.gl/M2MRdBmxfGeDy8qP8
And last for shiggles,
https://photos.app.goo.gl/AjYajxvKQmMvPcmk8
I have alot done on the helmet, should be done in a day or two. Stay tuned...
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #187 on: February 10, 2020, 09:26:07 PM »
Helmet is finished with paint as far as I'm concerned at the moment. Lucien finally has a face
https://photos.app.goo.gl/HYgi16PsrBWvFELNA

https://photos.app.goo.gl/tAmyuLgBU5QwkjHt8

https://photos.app.goo.gl/drc4iG1C7h2x1WHFA

https://photos.app.goo.gl/YZGESPRwAaAc68T79
And finally, 1 from the back. You won't see too much of this angle, but just for detail. You can see in the last pic the neck rim on the helmet. I thought about painting it metallic but then decided against it. If I leave it kinda black rubber looking it should blend right in with the neck roll I plan on wearing. That will cover my throat area. I'll either make 1 or use some old goalie gear that I've got hangin around.

I still have to wire up his LEDs for his eye and figure final lense solutions. I bought some Ironman eye kits a while back and want to revisit those now that I don't have to look through the eye holes. Finally 1 last shot up close and personal like
https://photos.app.goo.gl/MWpK1TQpSKEzvRCh9
Probably not a good spot to be in if you're Xenos filth!
More to come so stay tuned...
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #188 on: February 11, 2020, 08:35:26 PM »
Good progress report for today! Got his eyes sorted out. I tried the Ironman eye kits and they were too short.
A while ago I had also bought some different colored snowboard replacement lenses. I had 2 different lenses to choose from (orange/red and blue/green). I chose the orange/red and glad I did. It seemed to suit the armor color a little better
https://photos.app.goo.gl/V5RybeLM1yL4sd1h8

https://photos.app.goo.gl/kMkDuBvmMe3SB7TL7

https://photos.app.goo.gl/rgHArBkUb6niwY7L9
These give off a reflection on the tops of the cheeks that make it look like they're glowing. I cut some heavy card stock to make a pattern and then scribed it on the lense and used a Dremel to cut it out. Hot glue holds it in and fills the gaps. Some of the glue seeped out in the corners, but a little black paint seemed to hide it.
Also wired up his augmetic sensor and temporary battery
https://photos.app.goo.gl/CJ6gSLsRYX4Zh9pB9

https://photos.app.goo.gl/2cdsB11RYgQbaCsL9
He's really starting to take shape! This just drives me more to work on him. I hope you guys like what you see and please comment if you do. Thanx for watching and stay tuned for more...
« Last Edit: February 16, 2020, 08:25:53 PM by adeptus mechanicus »
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #189 on: February 12, 2020, 08:53:22 PM »
Finished his helmet wiring and switch location. I put it in his ear. I used the same type as on the lightning claws with the black plastic cover. Makes it look like it's supposed to be there.
https://photos.app.goo.gl/X3P2Yu2X4PhQGcSB8
Here's the inside of the helmet
https://photos.app.goo.gl/dEg89JbUzffWRhko6
I used scrap 1/16 foam for the straps and battery holder in the top. Everything is soldered and heatshrink tubed. I added the lenses to both parts of the augmetic sensor
https://photos.app.goo.gl/DLTWmocdEoDViR2r8

https://photos.app.goo.gl/AaCAyGvGbJnDf9PT6
It diffused the bottom LEDs a little bit, but I'm good with that.
1 final pic for the night that I've been waiting along time for is this 1
https://photos.app.goo.gl/2Cc6WQkSMiG2NmBo8
I can't believe how huge he is! And he's not even true scale. The arms and gloves will follow and still have some fab work on his apothecary glove. Then it's lower body. Sounds like a gym day, Lol. Stay tuned and Thanx for watching
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #190 on: February 16, 2020, 08:53:44 PM »
Progress report for today. Finished both elbows and 1 bicep. The other side is close to completion.
https://photos.app.goo.gl/kTpdHY23MfHv19Y36

https://photos.app.goo.gl/P9dHKmncKYyjQYtL9

https://photos.app.goo.gl/hzasKJzTxwGv3duk6

https://photos.app.goo.gl/w8ezwjfdZnkz2pN17

https://photos.app.goo.gl/5NQVbD873uZq6ybR7

https://photos.app.goo.gl/gAGtMCK6xgSiFCiB7
The side with the skull and piston is on the outside. This being the right side and the hose fittings to the back. Here's a close up of some grunge around the piston and an overall with the pauldron and forearm/ glove.
https://photos.app.goo.gl/XkcVDnLJoBCPsrRM7

https://photos.app.goo.gl/dmJsM5i5Um3whwPS9
I still have some strapping to do yet and some sizing rings to glue in but these are near the finish line. I also started poking at the gloves with a little paint. Those need to get finished and then his apothecary glove is next for the upper body. That 1 should be lots of fun. It's got LEDs, 2 light up screens and his narthecium drill that hopefully I can get to spin. That's the plan anyway. Stay tuned for more and Thanx for watching
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #191 on: February 18, 2020, 08:31:07 PM »
Final pics of biceps and elbows. Had some small details to finish up, like the hydraulic hoses and even out the grunge on both
https://photos.app.goo.gl/3eWiNQb3TNNhMEuM9

https://photos.app.goo.gl/6tCMyhETRjohSV9i6

https://photos.app.goo.gl/PQWp49DgxEsaLakBA
Had to add something to attach the top of the little hose to. I just used scrap foam and painted it to look like it's supposed to be there,LOL. Just in case somebody looks up in there, you know they will. I would, I'm nosey like that. Anyhow, sizing rings are cut and just need to be glued in. The straps are figured out and also need to get glued. Maybe I'll get pics with the shoulders on with them. That way it'll give me n idea how they hang. Still lots of work to do, but stay tuned...
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #192 on: February 20, 2020, 08:14:34 PM »
Progress report for the day. Aside from blocking in color on the gloves, I got a couple things done on the apothecary forearm. Here's a couple revisit pics. Sadly I didn't take construction pics of this up to this point but here it is as it stands
https://photos.app.goo.gl/rnQfHn4LcuphWKnm6

https://photos.app.goo.gl/FXfgDj53uJpWJdFR8

https://photos.app.goo.gl/Kf2FE2D4BVVKRs4S9
The 3 holes you see will be for switches for the LED's and the EL screens. The white foam strip with holes is the mounting spot for the LED's with some colored squares of plexiglass. And the outline for the small EL screen. Here's the back and underside
https://photos.app.goo.gl/KRKrMypCq3iQa6mt5
And 1 of the top with outline for the LG screen.
https://photos.app.goo.gl/hjatm2jwUXASRmJe9
Now, 1 thing I did do was make the long needles removable. I can swap them out with Con safe, dull, not hurty 1s
https://photos.app.goo.gl/zBqEvFE6iLXTHKGu5
I made the slug out of PVC and wood dowel and drilled a hole so the set screw will hold it in
https://photos.app.goo.gl/tF5wsLnujCU4TYEC6
That way, I can get some 1/4 inch wood dowel and make some nice rounded tipped 1s that won't put your eye out.
Finally an overall with the glove
https://photos.app.goo.gl/Vkhm4k1Sm84Qcacm8
The big gaping hole is for the guts of the drill bit and motor. Also those buttonhead screws will get swapped for some small knurled thumb screws. This 1 is gonna have alot of wiring to do and still a fair amount of fab work for the drill. I had to mount some blocks on the cuff of the glove and inside in the top of the forearm to keep it from twisting down. The weight is kinda unbalanced and only getting worse as I add more components. Not horrible, but I have to keep left rudder on it to make it hang straight. Thanx for watching and stay tuned...
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 198
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #193 on: February 21, 2020, 09:17:23 PM »
Progress for today. Got the strapping done on the arms. I only used 1 strap per arm . I tried 2 and thought it might limit my movement . I used the speed buckles like on back packs and such and made them adjustable.
https://photos.app.goo.gl/onRyHUAY5qnJtsqt8
It's enough to support the weight of it and still give some movement. They hang pretty close to where they look right judging by eye. Maybe need to move down just a tad, won't know until I suit up for a test.
https://photos.app.goo.gl/XocSHQHmJQysypE49

https://photos.app.goo.gl/M96SEKMR8QmAUA7d9

https://photos.app.goo.gl/BqqJdcrrkhZkp79KA

https://photos.app.goo.gl/Tct323us5yfnLAAw5

https://photos.app.goo.gl/WpYasDkuggBRg77BA
The hose ports on the back of the arms clear the pauldron and that's with the arms straight down. I figure my arms will be angled a little forward with the suit on that'll give the hoses more room anyway. Still lots to do, so stay tuned...Also, if these links aren't working, somebody say something so I can fix them
Winged freak,...wait til they get a load of me

Obscurus Crusade  |  Costuming  |  Space Marines  |  Brother Lucien joins the ranks of the Deathwing (WIP)
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!