gfxgfx
 
Please login or register.

Login with username, password and session length
 
gfx gfx
gfxgfx
 
Welcome to the Obscurus Crusade!
To use the Pepakura File Library you must be logged in.
 
gfx gfx
gfx
49380 Posts in 2560 Topics by 5410 Members - Latest Member: DrLicorice January 21, 2020, 12:05:26 PM
*
gfx* Home | Help | Login | Register | gfx
gfx
Obscurus Crusade  |  Costuming  |  Space Marines  |  Brother Lucien joins the ranks of the Deathwing (WIP)
gfx
gfxgfx
 

Author Topic: Brother Lucien joins the ranks of the Deathwing (WIP)  (Read 5090 times)

0 Members and 1 Guest are viewing this topic.

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #165 on: January 14, 2020, 09:10:03 PM »
Then I was able to put the shoulders on to get a feel for his size
https://photos.app.goo.gl/CCzLZmQqdbh2ZbJv6
You can tell from the size difference of the inner and outer shell, he's going to be big
https://photos.app.goo.gl/pvbZxE3SrYzu2hxYA
The outer on the left is a little spread out, but not much. At this point I had started detailing his left pauldron, but had both complete enough to hang on the body.
https://photos.app.goo.gl/ub1ahSm3KEgsTJJF8

https://photos.app.goo.gl/fynvQMo3kYK3CQKB9
Edge to edge he's 54 inches wide! And he's not even a true scale LOL! Where the hell am I gonna put him?
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #166 on: January 14, 2020, 09:31:32 PM »
At this point I added some detail on the side of his body and made some covers for the bearings to hide it some
https://photos.app.goo.gl/yfmQWSs2FvcEhnZ59

https://photos.app.goo.gl/SgDdDrWkYBjKGB3S8

https://photos.app.goo.gl/nZJarKi1GRdCNhWe9
If you're wondering what the bearing is screwed to, there's a sheet of 3/16 Luan on each side connected with a framework in-between.
https://photos.app.goo.gl/SA35rcY9RDZ3vAzP6

https://photos.app.goo.gl/jwR4xBTd5KDTuPg18
The ladder like frame part is in the top. The 2x4s stick through the top foam to serve as mount points for his search light and servo head buddy. Eventually this will serve to mount a cyclone rocker launcher that's in the works. That's 1 of the reasons for the frame, I didn't want it to cave in under the weight. The round aluminum plate is a backer for the screws. I had to move it because the shoulder didn't sit right. If you've got questions or comments please, by all means fire away. I'd be happy to answerthem Stay tuned and Thanx for watching!
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #167 on: January 16, 2020, 08:44:27 PM »
Back to the current part of the build. Todays progress, got a bunch painted on the shoulder
https://photos.app.goo.gl/SGiZcUDXiCiN4WXJ9

https://photos.app.goo.gl/M5fyf7s2RiHgH1ao7

https://photos.app.goo.gl/WeJ1DaXFoSiD318T7
The red on the deathwing symbol turned out really cool. If you can see from the closer of the pics, it has a metallic fleck under the red. I used metallic paint and laid Tamiya clear red over it. It came out like a dark blood color in person. I plan on using the same method when I get to the aquillia on the torso. Except it'll be green.
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #168 on: January 16, 2020, 08:57:34 PM »
Also I had a chance to lay out some letters for the banner
https://photos.app.goo.gl/v6MDyKu77q7Dj63s8
I had a buddy at work print some out at the size I needed to see what it would look like. Also she did a few other sayings  for scale like "burn the heretic, purge them all". I cut them into strips to mix and match to try and get enough length to fill the banner. But "for the emperor" seems to be the longest. I'll wind up painting them on by hand. I was hoping to use some vinyl stencils but the paint doesn't like it when you peel it off. Then I thought about using the letters from the stencils, but not sure about the longevity of them.
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #169 on: January 16, 2020, 09:12:14 PM »
Last but not least I threw some bling on for kicks
https://photos.app.goo.gl/sKW3fjMCUApcEKMQ6
1 of the shields from earlier. I still have 1 more to paint but have to grab some Dark Angel green to finish it. Here's a couple more of a power up from the game that I had made a while back
https://photos.app.goo.gl/Zeck4oUfDUBDi1Uh9

https://photos.app.goo.gl/idk15Vcwj2RQpXP3A
I don't know about this 1, not feeling it. Maybe I leave this 1 off. What do you guys think? Maybe another placement? Or another part of the armor or not at all? Anyhow, still have to finish the weathering and the lettering. This 1 is almost done though! Then I get to start on the body. Hellz yeah! Finish pics of the lightning claws coming soon, a few small things to touch up and done. End transmission...
« Last Edit: January 17, 2020, 09:44:35 PM by adeptus mechanicus »
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #170 on: January 17, 2020, 09:50:59 PM »
Small update for today. Got the banner letters painted on. Kind of a PIA, but turned out well enough for hand brushing
https://photos.app.goo.gl/4hEk961YucEjvcNc7

https://photos.app.goo.gl/HLtLCPAqPHy5TxNx8

https://photos.app.goo.gl/K7kqBHRVyo6uKnVS7
I lightened up the banner also. Makes it stand out from the shoulder a little bit better. That's all for today and Thanx for watching.
Winged freak,...wait til they get a load of me

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #171 on: January 18, 2020, 09:56:09 PM »
Got grunge? This is about half way done
https://photos.app.goo.gl/PoVF7yXZDBrErUuN7

https://photos.app.goo.gl/AvLGXhheByQ6xvhK8
I have the other half of the Deathwing symbol and some on the inside closest to the body yet. But, nearing completion. I've also decided to nix the Terminator power up, period. It just doesn't fit. I don't know what it is, but not it. I'll figure out something else or it'll be a shelf setter. It was fun making it though. That's all for now and Thanx for watching!
Winged freak,...wait til they get a load of me

Offline TankReady

  • Initiate
  • *
  • Posts: 19
  • :
  • Brother of Dust
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #172 on: Today at 10:45:35 AM »
Aw man looking very good!!!!
You getting close!

Offline adeptus mechanicus

  • Marine
  • ***
  • Posts: 179
  • :
  • Neophyte
Re: Brother Lucien joins the ranks of the Deathwing (WIP)
« Reply #173 on: Today at 11:44:17 AM »
Aw man looking very good!!!!
You getting close!
Thanx man, still have a long way to go yet. But this is the fun part (not that building it wasn't) Now I get to see him come to life per say. I think about how I can paint things or how I treat a certain problem all day at work. This just runs in the background. Then when I get home, I can go right at it. Stay tuned for some finish pics of this shoulder and the pair of lightning claws!
Winged freak,...wait til they get a load of me

Obscurus Crusade  |  Costuming  |  Space Marines  |  Brother Lucien joins the ranks of the Deathwing (WIP)
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!