Author Topic: Eldar Warlock (Read 21167 times)

glig · « **on:** July 12, 2012, 04:55:00 AM »

Finally taking my free time to make my dream costume, an Eldar Warlock.

The Plan:
Step 1. Create Helmet
Step 2: Create Rune Armour and staff
Step 3: Create Robe
Step 4:

?
Step 5: Awesome!

Here's my progress so far:

http://imgur.com/mfqTF
Basic plan and base helmet shape

http://imgur.com/4Nbfq
Added dome shape to base

http://imgur.com/bFqb0
First Application of Bondo (no Sanding)

Reatrea · « **Reply #1 on:** July 13, 2012, 03:57:00 AM »

Looks great so far!

Decided on a color scheme? Which craftworld?

CLOTHAR · « **Reply #2 on:** July 13, 2012, 04:15:00 AM »

Looks great! Did you free hand that all? Really nice work... for a xeno. [img]http://i6.ifrm.com/html/emoticons/tongue.gif' border='0' style='vertical-align:middle' alt='tongue.gif' />

glig · « **Reply #3 on:** July 13, 2012, 04:17:00 AM »

Haven't thought of my color scheme yet. I love Ulthwe, but I fear I may need a brighter scheme so that the outfit will pop in photos.

@ CLOTHAR The helm is a combination of two pep files plus a little creativity for the piping along the sides

glig · « **Reply #4 on:** July 13, 2012, 04:22:00 AM »

The base helmet pep is from this gallery: http://printablearmory.com/mmpr.html.

PhoenixRevival · « **Reply #5 on:** July 13, 2012, 12:09:00 PM »

Oooh. Nice linky! ty for that. Looking forward to seeing where your build goes. [img]http://i6.ifrm.com/html/emoticons/smile.gif' border='0' style='vertical-align:middle' alt='smile.gif' />

Daeouse · « **Reply #6 on:** July 13, 2012, 06:49:00 PM »

I love that link. . .

Looks like you have the basic shape down.

glig · « **Reply #7 on:** September 06, 2012, 08:28:00 PM »

Sorry that I've been gone for awhile. Work took me away from my project. Here's what I've done in the mean time:

I realized half-way through bondo that it was going to be difficult to build up the design I want. So I thought of a way to build down to the shape by using expandable foam.

First, I finished my first-layer of bondo, creating a surface area that the foam could stick to. Then I applied the foam throughout the helmet that I wanted bulk (kinda looks like a gift from nurgle at this point).

After it hardened, I started to sanddown to the shape that I want.

Once I finish sanding the foam, I'll apply another layer of bondo to smooth the surface.

CLOTHAR · « **Reply #8 on:** September 06, 2012, 11:09:00 PM »

Interesting work. It seems like a good start.

Gunhead · « **Reply #9 on:** September 07, 2012, 02:27:00 PM »

Yes this is very interesting. I have been thinking that this might be a good technicque since I say what Thorsolli did on his shoulders to smooth them out.

What kind of foam did you use? latex or poly?

glig · « **Reply #10 on:** September 07, 2012, 05:37:00 PM »

I used "GREAT STUFF Gaps & Cracks". It's a spray foam in a can.

The only problem is that the nozzle can clog quickly. You only really have one go per can.

Deetoz · « **Reply #11 on:** September 07, 2012, 06:39:00 PM »

It's a cool helmet, but I can't wait until you get most of the foam sanded away.
Right now it looks like

[img]http://i6.ifrm.com/html/emoticons/tongue.gif' border='0' style='vertical-align:middle' alt='tongue.gif' />

Gunhead · « **Reply #12 on:** September 07, 2012, 08:02:00 PM »

ROLFLMAO-OMG!!!

The Lamb-Chop build!!!

larkin · « **Reply #13 on:** September 07, 2012, 08:19:00 PM »

Divergent Reality · « **Reply #14 on:** September 07, 2012, 09:56:00 PM »

Quote from: Gunhead date=1347040920

The Lamb-Chop build!!!

This is the build that doesn't end, yes it goes on and on my friend...