Obscurus Crusade

Costuming => Space Marines => Topic started by: Brother Barachiel on October 13, 2017, 07:06:32 PM

Title: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 13, 2017, 07:06:32 PM
Greeting fellow Battle Brothers and Sisters of Battle.

This will be my Obscurus Crusade Build Log for Brother Barachiel of the Deathwing. (Terminator Armour) from the game Spacehulk Deathwing.

As i am about 90% complete already i will gather all my photos, notes, drawings and start the thread from day 1 of the build and fill the log from a-z including pictures, thoughts and modifications made.

Build will include a Powerfist and both an Assualt Cannon and Plasma Cannon

I will include some reference photos for the build on this post and an updated photo of my current progress.
I also post about the build on Instagram under hereseycosplay and also post some photos on the Obscurus Crusade facebook group.

Build Admin
Templates - Ex1le's Standard Terminator Armor - Foam
Powerfist Template - Gary Sterley Powerfist (Etsy)
Dark Angels 3D Models - (PM me and ill happily share them)

Current Progress Photos: 24 Dec 17
(https://i.imgur.com/7O60q9o.jpg)
(https://i.imgur.com/UNTjjoi.jpg)
(https://i.imgur.com/d7Zz7Zr.jpg)
(https://i.imgur.com/jRWVNWk.jpg)
(https://i.imgur.com/XZVvHOo.jpg)
(https://i.imgur.com/zknkUae.jpg)
(https://i.imgur.com/aWAjKEM.jpg)

Brother Barachiel Reference Photos

(https://i.imgur.com/2Ckutgl.jpg)
(https://i.imgur.com/0vM5r6d.png)
(https://i.imgur.com/sHRtkFf.jpg)





Title: Re: Spacehulk Deathwing Brother Barachiel Build
Post by: prev on October 13, 2017, 11:26:52 PM
That's some good looking armour dude.

Cant wait to see more progress!!!!!!!

Did you adjust scale at all?
Title: Re: Spacehulk Deathwing Brother Barachiel Build
Post by: Brother Barachiel on October 14, 2017, 07:16:28 PM
That's some good looking armour dude.

Cant wait to see more progress!!!!!!!

Did you adjust scale at all?

Cheers =)

Ill start updating this build log today and tomorrow with everything.

Nope i printed directly from the file without any adjustments. If i was too do this again i would definitely up scale the torso.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 14, 2017, 07:33:46 PM
Build Log Update 1: Boots (2015)

Ill preface this, as this is my first Warhammer 40K Build and my first Cosplay Build, i made a lot of poor decisions with this costume, one being using hot glue. After i found contact cement the build time and overall cleanliness of the costume has improved.

As most people start first thing i constructed was the boots. I printed out the templates and went for it. In the beginning i started using a scapel.. took me ages.. before i found a box cutter.

(https://i.imgur.com/ssNxTM1.jpg)
(https://i.imgur.com/7WLVrER.jpg)

Here is a taped up test photo. In the background you will see my MK1 stilts. I ended up ditching these due to weight and went with a foam insert ( i will update you on this further on this build log.
(https://i.imgur.com/eNuq8sH.jpg)

Here is it all glued together.
(https://i.imgur.com/SXO4ic1.jpg)
(https://i.imgur.com/iINO2EV.jpg)

Points/Thoughts
-At this point i had not decided on the overall build direction. As the Ex1le pattern is based of the Indomitus Pattern Armour i had too make adjustments once i had decided too do Brother Barachiel. Recently ive cut the toe cover too be flat too match the reference photos.
-If i was going too do this again i would try too make it so the top cap moved inside the ankle cover as i walk.
-Scale was not adjusted. It was printed direct from Pepakura on A4 Paper.
- EVA 75 foam is what i used, again i would use a higher density if possible maybe 200 or 275.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 14, 2017, 08:04:12 PM
Build Log Update 2: Shins (2015 and 2017)

Shin Armour, i forgot too take photos, but i printed out the templates on A4 and traced them on the foam and cut them out and glued them with hot glue. At this point i had made 1 shin end of 2015 and the second one didn't get started to Jan 17.

This is the first shin i did. At this point i hadn't printed the Knee Joint bolts. But i can tell you.. dont do them. They are too big and make walking annoying. I would make your own based of reference photos and make them slim line(Will show you what i did when i encounter this issue.)

(https://i.imgur.com/ULUJUEU.jpg)
(https://i.imgur.com/vobl2n5.jpg)
(https://i.imgur.com/otCUNdj.jpg)

Shins 2 completed Jan 17 and here are a few pictures of them.

(https://i.imgur.com/ui7P385.jpg?1)
(https://i.imgur.com/tCUWjnr.jpg?1)

DO NOT DO WHAT I DID... DO NOT SEAL YOUR SEAMS UNTIL YOUR FINISHED YOUR ENTIRE BUILD.. unless your entirely confident with your piece of armour... i preemptively did my boots and it has caused me so many issues.

(https://i.imgur.com/MLKu0Y3.jpg?1)
(https://i.imgur.com/CmWEm1t.jpg?1)
(https://i.imgur.com/P7jnlpH.jpg?2)

Points/Thoughts
- When tracing the shin pattern, i found that the whole template is a lot of straight edges. I found if i traced the pattern and made the cuts smoother and rounded instead of multiple small cuts, it made for a cleaner piece and cut down on sanding.
- As said try not too seal seams before your finished.
- I would heat form your shin makes it easier too glue it together,
- If i was too do the shins again id make sure too slow down and id reduce the number of cuts. I wouldnt get into the strap of trying too cut along the patterna nd keep the pattern more rounded.


Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 14, 2017, 08:27:42 PM
Build Log Update 3: Thighs (Feb 17)

Next part i did was the thigh section. If i did these again i would most definitely be doing it with Contact Cement.

Too assist with getting the edges too bend around on the internal plating i made a small 4mm incision on the back edge and heat formed them around being careful not too snap the foam. In the edges where she tore a bit more than i wanted i filled the space with hot glue or sandable caulk.

Below are the templates and various section of construction.

(https://i.imgur.com/tzSPpMP.jpg?1)
(https://i.imgur.com/1Q9iO3b.jpg?1)
(https://i.imgur.com/IaTxQRg.jpg?1)
(https://i.imgur.com/tAEhpaZ.jpg?1)
(https://i.imgur.com/0YKKBxg.jpg?1)
(https://i.imgur.com/Yj6NWoh.jpg?1)

Make sure when you make these you flip the pattern and dont do what i did and make two left thighs and have too remake it.


Points/Thoughts
- Template is pretty straight foward, Something the template is missing is a cap on the top and bottom too cover the internals. I traced around the edge and made a cap of them using 6mm foam. Adds some support and make the top and bottom look clean. (Will add photos of these later on)
- Again Dont follow the template and make short cuts, keep them clean and fluid and round everything off.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 14, 2017, 08:42:45 PM
Build Log Update 4: Pelvis (Part 1)

Next up is the Pelvis. For this log ill talk about the bottom half.

Quite straight foward, again id would encourage you too round off the template when cutting it out instead of it being all blocky.

Templating of the pelvis

(https://i.imgur.com/MeUuftN.jpg)
(https://i.imgur.com/k4kwFh2.jpg)
(https://i.imgur.com/H8aYWnX.jpg)

In progress construction

(https://i.imgur.com/VsHeQLS.jpg)
(https://i.imgur.com/zQGVG9R.jpg)
(https://i.imgur.com/BsbrUaj.jpg)
(https://i.imgur.com/sX495hz.jpg)
(https://i.imgur.com/xB5t5gS.jpg)

Points/Thoughts
- Only real sticking point is the back section. Some of the cuts and folds can be quite tricky too get into position.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 15, 2017, 06:08:11 AM
Build Log Update 5: Pelvis (Part 2)

Top part of the pelvis. This involved gluing the groin section to the waist band and attaching the belt band. Also i attached the rear enclosure and what i believe are like hydraulic valves on the back. Whilst the template is good i did have too add another layer on top of the waist/stomach band as the torso section doesnt cover correctly. Also unsure if it was just the thickness of the foam or my bad gluing skill but i had too have add additional band on the inside to the stomach band too fit in the pelvis.

I adjusted the Belt Buckle recently too a circle from the rectangle one, which will be reflected in upcoming logs.

(https://i.imgur.com/yWkRWVx.jpg)
(https://i.imgur.com/NRskgOD.jpg)
(https://i.imgur.com/Jz9w6DY.jpg)
(https://i.imgur.com/ozZJ4Uw.jpg)
(https://i.imgur.com/HDxITAV.jpg)
(https://i.imgur.com/WMw5Im8.jpg)
(https://i.imgur.com/JYfUfiX.jpg)
(https://i.imgur.com/2V7BjiP.jpg)

Next photo is where i was at after all of it. Note at this stage i hadn't added the additional band.

(https://i.imgur.com/eq2nHIo.jpg)

Points/Thoughts
- I believe my issue was my templates were off because of the A4 and Letter paper sizes which put of the waist band.
- The additional band on top of the stomach band will be needed to give you some leeway with the torso section.
- The hydraulic points the back of the pelvis probably should be glued on later in the build so avoid having too change the height of them if the scale is slightly off.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 15, 2017, 06:43:02 AM
Build Log Update 6: Torso Part 1

Torso was really fun too build! I will say however i think this needs to be scaled up just too give you a bit more room.

This 100% needs too have modifications too the arm holes. They are way too small and very uncomfortable. I cut a significant portion away from the side panels and i still will probably remove a little more.

If your planning on making a terminator armor that isnt Indomitus Pattern adjust the template on paper first and dont do what i did and not check it and be all the way through cosmetic upgrades before realizing you messed up the back vents.

I also suggest with support parts of the pattern that run along the bottom edges you actually cut them into small chunks along the "fold lines and glue them edge to edge, makes the whole process less emotional.

(https://i.imgur.com/qtqQwin.jpg)
(https://i.imgur.com/nlx7VLU.jpg)
(https://i.imgur.com/izr6vd3.jpg)
(https://i.imgur.com/DuVjgJN.jpg)
(https://i.imgur.com/Ymc2iAA.jpg)
(https://i.imgur.com/r9oDCXf.jpg)
(https://i.imgur.com/Aa64Ktc.jpg)
(https://i.imgur.com/W5jbPZK.jpg)
(https://i.imgur.com/B1UNx9X.jpg)
(https://i.imgur.com/qg8mfe1.jpg)
(https://i.imgur.com/mYzfDh5.jpg)

Points/Thoughts
-




Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 15, 2017, 06:52:04 AM
Build Log Update 6: Torso Part 1

Photo Dump of further Torso Progress

(https://i.imgur.com/NtD5f4B.jpg)
(https://i.imgur.com/GCnplGa.jpg)
(https://i.imgur.com/zeQ1si0.jpg)
(https://i.imgur.com/IJmZD5e.jpg)
(https://i.imgur.com/gh6cv8X.jpg)
(https://i.imgur.com/og6dYJ7.jpg)
(https://i.imgur.com/kmci7cT.jpg)
(https://i.imgur.com/NzeJOWa.jpg)
(https://i.imgur.com/iJWtSII.jpg)

Here is me test wearing it

(https://i.imgur.com/KPIyznz.jpg)
(https://i.imgur.com/SH8ziFk.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: pattonwty on October 16, 2017, 07:18:07 AM
Great work!!!
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 17, 2017, 05:11:50 AM
Build Log Update 7: Shoulders (Basic Construction)

Shoulders went together really fast. Only thing i would do different next time is increase the size of the middle section that runs along the bottom edge. Its only about 10cm long id prefer it too be about 15 -20cm long too match the other patterns, but for the Indomitus Pattern it spot on.

All the cosmetic stuff for my shoulders will be in another log.

Ill have too do another log for the Shoulder attachment as i am currently modifying it.

(https://i.imgur.com/DYEnD6Y.jpg)
(https://i.imgur.com/WdtVSGt.jpg)
(https://i.imgur.com/d4JYGwd.jpg)
(https://i.imgur.com/D0AOcNt.jpg)
(https://i.imgur.com/4eXtrYu.jpg)
(https://i.imgur.com/rVrkfko.jpg)
(https://i.imgur.com/RKQQPeU.jpg)
(https://i.imgur.com/7KIiK2U.jpg)
(https://i.imgur.com/1eJo6an.jpg)
(https://i.imgur.com/HtpTszR.jpg)
(https://i.imgur.com/og2BGdh.jpg)

Points/Thoughts
-


Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 17, 2017, 05:12:21 AM
Great work!!!

Thank you =)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 17, 2017, 05:21:53 AM
Build Log Update 8: Shoulder Pins

Here is the photos of what i have done for the shoulder mounting. Its simply just a bolt (Will remove thread) locked onto a small bit of aluminum flat bar. Inside the shoulder i have glued a piece of 50mm x 50mm foam block. I cut out a 50mm x 50mm square of the underside shoulder pad and glued the cube into the gap. I then drilled a hole through the middle of the cube and then glued a metal washer over the whole. Its quite crude but allows for easy removal of the shoulder. Obvious downside is it has little foward and back movement. I may revisit this before i go paint phase too allow some more movement (Ball and Socket joint most likely)

(https://i.imgur.com/Oa7RoDu.jpg)
(https://i.imgur.com/8HKccv6.jpg)
(https://i.imgur.com/YdUa3LI.jpg)
(https://i.imgur.com/vCKCGz1.jpg)

Points/Thoughts
- Need to revist the Shoulder mounting.
- Photos of the Underside of the shoulder pad
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 17, 2017, 05:25:35 AM
Build Log Update 9: Progress Photos as at March/April 2017

Here is a photo of where i was at March April 2017.

(https://i.imgur.com/jK9sZ2L.jpg)

Points/Thoughts
-
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 07:46:28 PM
Build Log Update 10: Arms

Currently Arms are still a work in progress  due to the power fist and alter the desgin for more comfort but i ill link some photos of what i have done so far here.

(https://i.imgur.com/BdHHJHb.jpg)
(https://i.imgur.com/XDVM3qP.jpg)
(https://i.imgur.com/2RZkWUr.jpg)
(https://i.imgur.com/WkaPebD.jpg)
(https://i.imgur.com/EzPup5H.jpg)
(https://i.imgur.com/qavVAre.jpg)
(https://i.imgur.com/LHmNzCy.jpg)

Points/Thoughts
- Will remove the bolts on each side and make some more slim line ones for extra movement.
- The Ex1le files have a more rounded finish near where the glove goes, but the game model is more squared off with a detail jutting off the front so might modify them a fair bit.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 07:54:38 PM
Build Log Update 11: Boots

The boots.. first time seeing really if i could get some walk time in these bad boys.

First off the inside of the boot is made with 50mm foam glued ontop of each other. 5 layers all up.
Next i glued a piece of timber too the top of the foam and screwed a shoe to it. Very Primitive. I will go back and fix up the wood and shoe housing before paint.

You will notice in the pictures i started working out how i would mount the shins too the boots. Its gone through a few phases but in upcoming logs ill show what ive done with it.

(https://i.imgur.com/qAzNXEU.jpg)
(https://i.imgur.com/sp7uy0P.jpg)
(https://i.imgur.com/tAtY9pQ.jpg)
(https://i.imgur.com/H0V9YQQ.jpg)
(https://i.imgur.com/sSV5TKz.jpg)
(https://i.imgur.com/Clq72m3.jpg)
(https://i.imgur.com/2xZskua.jpg)

Points/Thoughts
-Reengineering of the back support panels on the boots and how it works with the shin. too hold it off the ground.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 08:24:45 PM
Build Log Update 12: Boot and Shin Joining.

Ive used buckles and a bit of foam too get the shins too hold tight on the boots. Now looking back at it id probably like them too have a bit more movement but i think im happy too sacrifice the movement for them too sit correctly on the boot.

Essentially its 3 buckles. One front and two on the sides, with a foam section added too the back of the boot and an internal foam block inside the shin.

I will replace the foam blocks with something nicer just for my own OCD.

(https://i.imgur.com/jH6gbNJ.jpg)
(https://i.imgur.com/usqbsb4.jpg)
(https://i.imgur.com/JF6hgB3.jpg)
(https://i.imgur.com/H4QLUBF.jpg)
(https://i.imgur.com/QJQ93fE.jpg)
(https://i.imgur.com/NzYgIyX.jpg)
(https://i.imgur.com/ib8Z5GQ.jpg)
(https://i.imgur.com/UTWQNpB.jpg)
(https://i.imgur.com/j1XIXT7.jpg)

Points/Thoughts
-Adjusting the foam blocks is required.
-Securing the Buckle straps.. they are done using hot glue... so might need too do something incase of heat.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 08:38:13 PM
Build Log Update 13: Shin/ Thigh Joint.

My biggest waste of time and money .. was this metal exo skeleton. I have moved too a strap and buckle system.

Ill keep the photos here just too show what you could do and what i was thinking when i was doing it.

(https://i.imgur.com/NFUBXV5.jpg)
(https://i.imgur.com/RuRXion.jpg)
(https://i.imgur.com/SrEm1JY.jpg)
(https://i.imgur.com/oj4eAyC.jpg)
(https://i.imgur.com/s6Cgsa2.jpg)
(https://i.imgur.com/LuN0Hxo.jpg)
(https://i.imgur.com/UY8Wx4l.jpg)
(https://i.imgur.com/hWHpRK3.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 08:47:24 PM
Build Log Update 14: First Boot and Torso Wear Test.

Here are some cheeky photos of the first time i chucked some the costume items.

(https://i.imgur.com/v64ZPre.jpg)
(https://i.imgur.com/muLcRDH.jpg)
(https://i.imgur.com/GQpn07x.jpg)
(https://i.imgur.com/fQ8YzaL.jpg)
(https://i.imgur.com/EtcH2Dm.jpg)
(https://i.imgur.com/MTl8BDX.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 08:58:28 PM
Build Log Update 15: Arms Connection Test.

Again ive gone with the strap and buckle system here. Most people have the buckle on the inside of the Shoulder Pad. For me the shoulder pad stuck out too far for this to be comfortable so i have done mine inside the top section of the arm hole.

(https://i.imgur.com/5PmmMce.jpg)
(https://i.imgur.com/h9I7fOI.jpg)
(https://i.imgur.com/FQc3Gdt.jpg)
(https://i.imgur.com/CEwE1Hl.jpg)
(https://i.imgur.com/gMIo4jr.jpg)
(https://i.imgur.com/dTiPRRE.jpg)
(https://i.imgur.com/tZ2zxqB.jpg)



Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 09:07:50 PM
Build Log Update 16: First Dress Test

Picture below are from my first Dress Test =) was a very exciting time.

(https://i.imgur.com/lGDwzz7.jpg)
(https://i.imgur.com/C0SQxi4.jpg)
(https://i.imgur.com/l17FTAr.jpg)
(https://i.imgur.com/nCA8tzH.jpg)
(https://i.imgur.com/9ksdIPp.jpg)
(https://i.imgur.com/EwSFVJE.jpg)
(https://i.imgur.com/SnNcnLy.jpg)
(https://i.imgur.com/WSXKyyD.jpg)
(https://i.imgur.com/8Xpqt4F.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 09:21:12 PM
Build Log Update 17: Deathwing Shoudler

First shoulder too get its cosmetic upgrades. Right Side. Deathwing Logo.

Started off drawing up the logo from the in game model on paper. Cut it out using 6mm foam and carved it with a dremel.
I also did the first mock up of the Shoulders parchments.

(https://i.imgur.com/EBOT98V.jpg)
(https://i.imgur.com/IbD1jBU.jpg)
(https://i.imgur.com/yicEPvo.jpg)
(https://i.imgur.com/XPE0WiV.jpg)
(https://i.imgur.com/CIO7Jhm.jpg)
(https://i.imgur.com/D2i7w9R.jpg)
(https://i.imgur.com/vYo5QKg.jpg)
(https://i.imgur.com/uJI5S9O.jpg)
(https://i.imgur.com/WvQzaEg.jpg)
(https://i.imgur.com/NtLbmiD.jpg)
(https://i.imgur.com/C67tGYm.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 09:42:21 PM
Build Log Update 17: Deathwatch Shoulder

Ok so im aware of the Deathwatch lore, but not sure about Spacehulk Deathwing and the Brother Barachiel lore and his connection with the Deathwatch. I can only assume that perhaps for the game lore he was once a part of the Deathwatch and came back to the Deathwing after his service with them. Explains the Shoulder Armour.

This has been by far at this point of the build where i was having the most fun. Quite and interesting piece of armour and all the hidden stuff i snuck into this.. one of the proudest parts of my build.

(https://i.imgur.com/xo6rEKb.jpg)
(https://i.imgur.com/x6DiDmk.jpg)
(https://i.imgur.com/iQEtJaU.jpg)
(https://i.imgur.com/2LlPDtJ.jpg)
(https://i.imgur.com/5lLiagf.jpg)
(https://i.imgur.com/HcqgsYR.jpg)

After this came the Lettering !! Find all the awesome Dark Angels References !!

(https://i.imgur.com/P1RwyQr.jpg)
(https://i.imgur.com/jQYj6Xu.jpg)
(https://i.imgur.com/NitHAqD.jpg)
(https://i.imgur.com/ab9MqTl.jpg)

After this came mounting the Skulls and Hand Carving the Bones.

(https://i.imgur.com/T5GBAJ7.jpg)
(https://i.imgur.com/v2fldqo.jpg)
(https://i.imgur.com/EPJZkma.jpg)
(https://i.imgur.com/yaj2xD6.jpg)
(https://i.imgur.com/HZ7n0xk.jpg)
(https://i.imgur.com/Ig5FnF6.jpg)
(https://i.imgur.com/XcGefN7.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 19, 2017, 09:57:32 PM
Build Log Update 18: Left Shin

The most time consuming dremel action .. ever. Dremeling took ages and was quite messy. Foam dust everywhere!!

(https://i.imgur.com/DFsfEJS.jpg)
(https://i.imgur.com/TYmaRyM.jpg)
(https://i.imgur.com/1CPlXhy.jpg)
(https://i.imgur.com/fsw7lFl.jpg)
(https://i.imgur.com/GUp7WDf.jpg)
(https://i.imgur.com/TljuB4U.jpg)
(https://i.imgur.com/9POG8Bv.jpg)
(https://i.imgur.com/apnkTph.jpg)
(https://i.imgur.com/3TqDbkA.jpg)
(https://i.imgur.com/ruRyERB.jpg)
(https://i.imgur.com/XoBqZNq.jpg)
(https://i.imgur.com/9zW5rVS.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 20, 2017, 12:59:11 AM
Build Log Update 19: Right Shin Eagles and Angels

This shin has the most going on. Full Double Headed Eagle, Hooded Angels and the Sun.

By far the longest part of the whole build, very time consuming but totally worth it in the end.

I started by free hand drawing roughly from the in game models and a few reference pictures. I did the template as a half and flipped it to get the full eagle. The eagle is made with 12mm foam base and all the Feathers are done with 2mm foam and the Feet and top edge of the wings was done with 6mm foam.

(https://i.imgur.com/TBcbZ36.jpg)
(https://i.imgur.com/Rh2rONJ.jpg)
(https://i.imgur.com/zrvzNKN.jpg)
(https://i.imgur.com/VVuIMbV.jpg)
(https://i.imgur.com/ZLpA13a.jpg)
(https://i.imgur.com/kJoJ2NC.jpg)
(https://i.imgur.com/p8Hx5xc.jpg)
(https://i.imgur.com/DJu5IYo.jpg)
(https://i.imgur.com/ZeASbSv.jpg)
(https://i.imgur.com/z8mGIn3.jpg)
(https://i.imgur.com/VkXGhqa.jpg)



Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 20, 2017, 01:08:44 AM
Build Log Update 20: Right Shin Angels

Again i free hand drew the angel template from the in game model. I managed too get them too look pretty good in 3D.

This was the first iteration of the angel
(https://i.imgur.com/O0pE3Y1.jpg)
(https://i.imgur.com/37S6ffM.jpg)

This is the new version and the direction i went with.

(https://i.imgur.com/msmWMtb.jpg)
(https://i.imgur.com/r2XbWfB.jpg)
(https://i.imgur.com/kTByrA4.jpg)
(https://i.imgur.com/qFHq6RY.jpg)
(https://i.imgur.com/zx8i53C.jpg)
(https://i.imgur.com/xRIhGou.jpg)
(https://i.imgur.com/wPDfBQA.jpg)
(https://i.imgur.com/zYNROjC.jpg)
(https://i.imgur.com/4jG93Yt.jpg)
(https://i.imgur.com/m84j2cb.jpg)
(https://i.imgur.com/Zrrxtgc.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 20, 2017, 01:23:49 AM
Build Log Update 21: Torso Updates Part 1

First part will go over the Torso Wings i made. I pretty much took an in game screenshot .. scaled it printed it out and cut it up into the foam templates. Pretty simple. I hand drew the I logo also too make it too scale.

(https://i.imgur.com/uNFSx6o.jpg)
(https://i.imgur.com/9pW3CJ5.jpg)
(https://i.imgur.com/vyAh6C4.jpg)
(https://i.imgur.com/b07Tpds.jpg)
(https://i.imgur.com/p9dTNzr.jpg)
(https://i.imgur.com/jOF1XEp.jpg)
(https://i.imgur.com/04wQ8Mw.jpg)
(https://i.imgur.com/Bo2YGql.jpg)
(https://i.imgur.com/gjdbj6I.jpg)
(https://i.imgur.com/SL9cGNz.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 20, 2017, 01:27:36 AM
Build Log Update 21: Torso Updates Part 2

Photo dump of the extra stuff i have made too fill out cosmetic details on the torso. THis includes the Fleur De Lis the Two Light Boxes and the two metal parts on the top side of the torso.

(https://i.imgur.com/dUU7MER.jpg)
(https://i.imgur.com/jnxim2i.jpg)
(https://i.imgur.com/U2ckTdH.jpg)
(https://i.imgur.com/vxXbDav.jpg)
(https://i.imgur.com/qmkfBoj.jpg)
(https://i.imgur.com/E6Nhd0B.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 20, 2017, 01:35:10 AM
Build Log Update 22: Current Build Progress as at 10 OCT 17

Here is where we are at the 10 OCT 17. Im posting this reply on the 20th of OCT 17 and shes changed even more since then.

I have a few days off next week so ill be able too get a fair chunk of weathering and cosmetic action done.

(https://i.imgur.com/HJkvkkR.jpg)
(https://i.imgur.com/iaGE4G9.jpg)
(https://i.imgur.com/rhCr7U4.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 20, 2017, 01:52:56 AM
Build Log Update 23: 20 Oct 17 - Cosmetic Upgrades

Finally at a point now where i can update on the correct date.

This update ive done a few things. Ive done the Dremel Work on the Toes. Added the Plastic, Square Top Rivets too the Shoulders. Finished the Shins off with the Joint Nuts. Ive also made the ring around the centre buckle and mounted a resin skull on.

Tasks for the weekend will be the final section of the center pelvis, needs another one to make it flow better when im wearing it.
Find some of those eyes too be rounded rivets for the eagle shin and stick them on.
Add some small foam details too the thighs
Buckle system for right thigh and shin
Finish off the Parchment scrolls for the shoulder
Make modifications too the torso section where the arm holes are for more comfort.
For the back vents i need too make the flaps for them and small foam details im missing from the in game models.
Also i would like too start my modifications for the arms, but i have a few days off next week so hopefully get them done and if my parts arrive for the powerfist ill start building that!!

(https://i.imgur.com/zsnuAjP.jpg)
(https://i.imgur.com/n8ScwI5.jpg)
(https://i.imgur.com/PN21q8C.jpg)

(https://i.imgur.com/GQVq5Mg.jpg)
(https://i.imgur.com/3kwhmmO.jpg)
(https://i.imgur.com/fWqrvte.jpg)

(https://i.imgur.com/onYLbM4.jpg)
(https://i.imgur.com/Bv1F010.jpg)
(https://i.imgur.com/gsn1QnB.jpg)

(https://i.imgur.com/3apPBS0.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Ziba on October 20, 2017, 12:00:56 PM
Thank you very much for sharing your build! It's a very nice job and it is inspiring as I'm also in the process of building my first Space Marine.
It really helps me to read your comment and look carefully at your picture so really thank you and good luck with the future!
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 23, 2017, 08:37:19 PM
Thank you very much for sharing your build! It's a very nice job and it is inspiring as I'm also in the process of building my first Space Marine.
It really helps me to read your comment and look carefully at your picture so really thank you and good luck with the future!

Thanks mate =) Hope you have fun making your space marine. Ill be updating my log later on today with a few more updates.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 25, 2017, 07:04:39 AM
Build Log Update 24: 25 Oct 17 Update

This update is just showing a few more cosmetic upgrades being done.

Small things ive done are the Deathwing thigh armour Plate, Gluing down the fluer de lis on the torso. Further adjustments too the arm hole on the torso. Small adjustments to the actual right arm. Shoulder Scrolls are now done. Also ive done the back vents on the torso and these small small armour plates near the head dome.

Ive had a small issue with the foam warping .. not sure why but it put the back vents right off.. so i adjusted best i could.

Back Vents - Torso
(https://i.imgur.com/sl3lF3A.jpg)
(https://i.imgur.com/r2gJEGQ.jpg)
(https://i.imgur.com/OyZjZF3.jpg)
(https://i.imgur.com/B6oqMq0.jpg)
(https://i.imgur.com/FjbbWNw.jpg)

Deathwing Thigh Plate
(https://i.imgur.com/2MvrVok.jpg)
(https://i.imgur.com/zZzffa5.jpg)

Shoulder Scrolls
(https://i.imgur.com/btuQIyJ.jpg)
(https://i.imgur.com/X514grW.jpg)
(https://i.imgur.com/0bUGNKc.jpg)
(https://i.imgur.com/HrJWXjC.jpg)

Fleur de Lis
(https://i.imgur.com/yng9Ukk.jpg)
(https://i.imgur.com/qMcaW0Y.jpg)

Torso Small Armour Plates
(https://i.imgur.com/x7NdQqR.jpg)
(https://i.imgur.com/prwDd8s.jpg)


Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 26, 2017, 03:35:53 AM
Build Log Update 25: 26 Oct 17 Update

Today i worked on finishing the Deathwing thigh armour plate and the torso/groin armour. I also did some practice of the battle damage with my soldering iron.

Deathwing Thigh Armour.

(https://i.imgur.com/0izO6Vn.jpg)
(https://i.imgur.com/frXTqOF.jpg)
(https://i.imgur.com/1srrAsq.jpg)
(https://i.imgur.com/T3ms4Ah.jpg)

Groin Armour

(https://i.imgur.com/DdvLrbh.jpg)

Battle Damage Practice

(https://i.imgur.com/U2lwDvy.jpg)



Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 26, 2017, 05:51:10 AM
Build Log Update 26: 26 Oct 17 Dress Test

Jump in the costume quickly for a few progress shots since the last ones too update the build log and see my progress =)
Pretty exciitng stuff.

(https://i.imgur.com/1vrPNu9.jpg)
(https://i.imgur.com/w6FuFIw.jpg)
(https://i.imgur.com/GqOGawz.jpg)
(https://i.imgur.com/wxAhbEN.jpg)
(https://i.imgur.com/J0aNgzr.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on October 30, 2017, 03:00:32 AM
Build Log Update 26: 30 Oct 17 Update - Boot Upgrade and Pelvis Upgrades.

Few updates since the last dress test. I have modified the left boots too better reflect the boot from the in game model. Also i have done some updates to the the pelvis. I moved the back vents up about 3 inches.
 and created some Armour pieces for the back section.

The boots turned out really well. However once i clicked the Shins back in... covers all the hard work up. So i might try and raise the back section up a little.

Goals over the next week will be
- Complete the right boot
- Complete the belt section of the pelvis armour

Upcoming goals for the build
- Once i order the 3mm Foam finish the detailing on the shoudlers
- Powerfist Build. Awaiting the ABS sheets too arrive and ill be able too build it.
- Torso. 3D figures have been printed once they are recieved ill be gluing them onto the Torso.
 - Rework the shoulder mounting
 - Details on the back (Round Indent)
- Arms require some details. but will focus on these once the Powerfist has been made.
- Terminator Helmet. In progress. I now have the foam. so I will make a card stock version of my final model and once im happy ill start making it.

Then ill start sealing and priming!! Getting closer, but im not in a rish as i dont want too skip any details or ruin the final product.

Boot Up Grade
(https://i.imgur.com/mLZxfgz.jpg)
(https://i.imgur.com/TF3wite.jpg)
(https://i.imgur.com/Nci7uZS.jpg)
(https://i.imgur.com/Zl4QeUW.jpg)
(https://i.imgur.com/9Tsvjjl.jpg)
(https://i.imgur.com/kpmbBaU.jpg)
(https://i.imgur.com/0KMF4zm.jpg)
(https://i.imgur.com/esgxXwW.jpg)
(https://i.imgur.com/tTDrQ8O.jpg)
(https://i.imgur.com/C16gNrF.jpg)

Torso Back Armour
(https://i.imgur.com/DDDJj71.jpg)


Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: prev on November 02, 2017, 04:49:04 AM
Awesome build log thus far dude!!!!

I have been meaning to build a Space Marine for some time now (years in fact).

Now I may have to attempt a Terminator...
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on November 07, 2017, 06:48:51 AM
Build Log Update 27: 7 Nov 17 Update - Powerfist and Torso

Powerfist Time!!

Finally my ABS sheets came in. I went straight too work cutting it all out and gluing/screwing together.
Over the last few days i started blocking in the details on the gauntlet itself and started the process of doing the cosmetic upgrades on that. Overall ive pretty much done the same as Gary Sterley's build with the rigging and also the gauntlet pattern, but all the cosmetics will really make this powerfist pop. See below a massive photo dump of progress.

Also ill include a few photos of the 3D angels that came in for the Torso.

(https://i.imgur.com/BbI2U6J.jpg)
(https://i.imgur.com/pIpuNCW.jpg)
(https://i.imgur.com/E2ZNNE7.jpg)
(https://i.imgur.com/KK1aa0B.jpg)
(https://i.imgur.com/BtmrEIK.jpg)
(https://i.imgur.com/t4a84Nr.jpg)
(https://i.imgur.com/7SRohPj.jpg)
(https://i.imgur.com/oxNIdQv.jpg)
(https://i.imgur.com/hQ07M4h.jpg)
(https://i.imgur.com/G5yxTbz.jpg)
(https://i.imgur.com/41KdI07.jpg)
(https://i.imgur.com/0ypcSZm.jpg)
(https://i.imgur.com/BHkY7VD.jpg)
(https://i.imgur.com/x5YLuph.jpg)
(https://i.imgur.com/xTNbjWg.jpg)
(https://i.imgur.com/BmKM3ks.jpg)
(https://i.imgur.com/VDXFha2.jpg)
(https://i.imgur.com/jcxD21M.jpg)
(https://i.imgur.com/vGypeL3.jpg)
(https://i.imgur.com/JHx7FCZ.jpg)
(https://i.imgur.com/Suc1gF6.jpg)

Torso 3D Angels
(https://i.imgur.com/U4DtkkT.jpg)
(https://i.imgur.com/1uy7LLN.jpg)
(https://i.imgur.com/8RT0ZYn.jpg)
(https://i.imgur.com/NZ0IGT3.jpg)
(https://i.imgur.com/Uhd1PNw.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on November 07, 2017, 08:34:27 PM
Awesome build log thus far dude!!!!

I have mean meaning to build a Space Marine for some time now (years in fact).

Now I may have to attempt a Terminator...

Thanks mate !! Join the terminator club !!
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: prev on November 09, 2017, 09:15:05 PM
I'm thinking that I'd have to make the pieces bigger. I'm 6'2", and am unsure how the unaltered parts would fit...
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on November 10, 2017, 03:35:21 AM
I'm thinking that I'd have to make the pieces bigger. I'm 6'2", and am unsure how the unaltered parts would fit...

What I can do for you is measure from the inside of the boot too the top of the costume as it sits in real life. I think everything should suit your height except the torso. I feel personally that is requires to be scaled up a fraction. If you were going add a foot too the costume with stilts then I would up the entire scale. Would be an intimidating costume at that size. I'll play around with the 3d model and see what it needs to be too fit you in at 6.2ft and 7.2ft.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: prev on November 12, 2017, 02:20:36 AM
I'm thinking that I'd have to make the pieces bigger. I'm 6'2", and am unsure how the unaltered parts would fit...

What I can do for you is measure from the inside of the boot too the top of the costume as it sits in real life. I think everything should suit your height except the torso. I feel personally that is requires to be scaled up a fraction. If you were going add a foot too the costume with stilts then I would up the entire scale. Would be an intimidating costume at that size. I'll play around with the 3d model and see what it needs to be too fit you in at 6.2ft and 7.2ft.

Outstanding. That would be awesome!!!!

Although, if I was to build a Terminator at 7'2" (or so), I honestly wouldn't know where I'd display the big bastard. It would be awesome tho...

My apologies for interrupting progress pics. Carry on good sir.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on November 13, 2017, 06:10:17 AM
Build Log Update 28: 13 Nov 17 Update - Powerfist

Been working more on the iconography and lettering on the Powerfist Gauntlet.

I did the outside edging first, then laid down inch and half squares. Next i made the Circle and edge details.
I then hand drew the I symbol and cut that out and glued it into place. Laid down the lettering and here we are now.

I still have heaps too do overall, i have big list im slowly ticking off. Should have another Full Test suit up shortly. After i affix the angels onto the Torso and do the belt on the pelvis.

Enjoy the photos =)

Edging

(https://i.imgur.com/1OnVM0y.jpg)
(https://i.imgur.com/rFgvR8Y.jpg)
(https://i.imgur.com/VPtES1f.jpg)
(https://i.imgur.com/0SvWpYX.jpg)
(https://i.imgur.com/HSgny4Z.jpg)
(https://i.imgur.com/c162fi9.jpg)


Squares

(https://i.imgur.com/jZhzh9U.jpg)
(https://i.imgur.com/h46Rnom.jpg)
(https://i.imgur.com/ALTaMUo.jpg)
(https://i.imgur.com/kHlvuwF.jpg)
(https://i.imgur.com/ovhZ5Zs.jpg)
(https://i.imgur.com/qg2BYcK.jpg)
(https://i.imgur.com/0l4x0S2.jpg)
(https://i.imgur.com/yxbSPtE.jpg)
(https://i.imgur.com/RDV40me.jpg)
(https://i.imgur.com/OLVdOOX.jpg)
(https://i.imgur.com/mu4oR1H.jpg)

Iconography

(https://i.imgur.com/Y2ovsYB.jpg)
(https://i.imgur.com/q2pdFo1.jpg)
(https://i.imgur.com/evJFZB6.jpg)

Lettering

(https://i.imgur.com/V556W4f.jpg)
(https://i.imgur.com/H3M0fuV.jpg)
(https://i.imgur.com/cs5Sh1O.jpg)
(https://i.imgur.com/uXzJ3FO.jpg)
(https://i.imgur.com/uXzJ3FO.jpg)
(https://i.imgur.com/OTHniZp.jpg)
(https://i.imgur.com/iCGyE0C.jpg)
(https://i.imgur.com/Qz99w1D.jpg)

Wearing the Fist

(https://i.imgur.com/jMAiGdf.jpg)
(https://i.imgur.com/CLv0mnN.jpg)
(https://i.imgur.com/i4qskEj.jpg)


Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on November 21, 2017, 05:24:46 AM
Build Log Update 29: 21 Nov 17 - Dress test with powerfist

Here are some juicy photos of the Dress Test with the Fist of Caliban on. Also you will note the angels have been glued on. Ill do a another update shortly of the other cosmetic upgrades i have done. Mainly the ring around the chest and upgrades too the right arm and rigging.

(https://i.imgur.com/UNTjjoi.jpg)
(https://i.imgur.com/2La4thl.jpg)
(https://i.imgur.com/jRWVNWk.jpg)
(https://i.imgur.com/XZVvHOo.jpg)
(https://i.imgur.com/UNTjjoi.jpg)
(https://i.imgur.com/FsEG0mG.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on November 21, 2017, 05:39:10 AM
Build Log Update 30: Torso Upgrades

Below are pictures of the upgrades i did too the torso. First off i made the holes in the outer rim on the chest armour. This was done with a pipe that i sharpened with a dremel and twisted it down into the foam making near perfect holes. After this i used small scrap foam too glue on the underside. I then added the small edge details to the I symbol. After this i glued the angels down onto the foam. The two small figures were put bases and glued too those. The front angel was backed with 6mm foam and then glued too the middle of the I symbol. After this i drew the back detailing on and carved it in with a hot knife.

Chest Armor Holes
(https://i.imgur.com/qANV6Jc.jpg)
(https://i.imgur.com/lWuAGo1.jpg)
(https://i.imgur.com/YiwvUfh.jpg)

Edge Details
(https://i.imgur.com/H1DxGEJ.jpg)

Angels
(https://i.imgur.com/vgNgv1e.jpg)
(https://i.imgur.com/O693FaD.jpg)
(https://i.imgur.com/YKwuc1L.jpg)

Back Details
(https://i.imgur.com/bkw2fIC.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on December 06, 2017, 04:52:45 AM
Build Log Update 31: Helmet

Hello again Battle Brothers and Sisters of Battle. Been really busy with work and sickness, so build has been slow. Here are pictures of the construction of the Terminator Helmet. Not finished but thought id do a dump of progress pictures for the guys making terminator Armour.

(https://i.imgur.com/9NvYue5.jpg)
(https://i.imgur.com/zTarRo7.jpg)
(https://i.imgur.com/vl3dsCp.jpg)
(https://i.imgur.com/Yww8NTU.jpg)
(https://i.imgur.com/J0v0hCe.jpg)
(https://i.imgur.com/4d0ympP.jpg)
(https://i.imgur.com/ko4Pfhv.jpg)
(https://i.imgur.com/Ho52K1J.jpg)
(https://i.imgur.com/g4MCu7T.jpg)
(https://i.imgur.com/QfbOkEA.jpg)
(https://i.imgur.com/7M9ee9t.jpg)
(https://i.imgur.com/nPV1Oc2.jpg)
(https://i.imgur.com/Ki81pqX.jpg)
(https://i.imgur.com/zd3K0Bx.jpg)
(https://i.imgur.com/E3IWdH2.jpg)
(https://i.imgur.com/pEySzYt.jpg)
(https://i.imgur.com/xSXGo4s.jpg)
(https://i.imgur.com/y8heSVG.jpg)
(https://i.imgur.com/HPw3nZo.jpg)
(https://i.imgur.com/rquFFYU.jpg)
(https://i.imgur.com/PCpjZdr.jpg)
(https://i.imgur.com/JacKk1k.jpg)
(https://i.imgur.com/5BhnPCe.jpg)
(https://i.imgur.com/Ko4YuAL.jpg)
(https://i.imgur.com/NyVpAyn.jpg)
(https://i.imgur.com/e8OMZd1.jpg)
(https://i.imgur.com/Bp3uGcf.jpg)
(https://i.imgur.com/CyvTAH9.jpg)
(https://i.imgur.com/6iwPzzr.jpg)
(https://i.imgur.com/FcB7rXV.jpg)
(https://i.imgur.com/RQkGKOt.jpg)
(https://i.imgur.com/cSI60nX.jpg)
(https://i.imgur.com/kLqNEfp.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: doomfist on December 09, 2017, 12:18:45 AM
NICE!  Looking good. 
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on December 11, 2017, 02:40:48 AM
NICE!  Looking good. 

Thanks mate. Hopefully tonight ill get up some pictures of me wearing it all dressed up!!

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: ViolentDream on December 11, 2017, 07:52:13 PM
oh yeah, this is definitely one of the better Termie builds around. I do notice that the helmet won't be affording you any head movement?
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on December 11, 2017, 08:01:26 PM
oh yeah, this is definitely one of the better Termie builds around. I do notice that the helmet won't be affording you any head movement?

Thanks!! Well actually I've done some testing and I think I have a solution for that. I'm looking at bringing the head hole forward and using a head harness system inside the helmet too get some movement.  But in the picture the helmet is pushed back pretty far. I'll upload some picture tonight of me with it on my head.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on December 24, 2017, 02:12:33 AM
Build Log Update 32: Helmet Finished

Here are some pictures of the finished helmet. Probably one of the peices im most proud of. Modified the EX1le pattern too fit my head and made it too ressemble the in game model more.

(https://i.imgur.com/hSe5tTB.jpg)
(https://i.imgur.com/XQvmjNY.jpg)
(https://i.imgur.com/wiIVnCh.jpg)
(https://i.imgur.com/0a1rXUU.jpg)
(https://i.imgur.com/fag7uTy.jpg)
(https://i.imgur.com/GHCzMKh.jpg)
(https://i.imgur.com/ExgyYLz.jpg)
(https://i.imgur.com/ByumIm2.jpg)
(https://i.imgur.com/0GIxPiP.jpg)
(https://i.imgur.com/mQTHWf5.jpg)
(https://i.imgur.com/9ThNqmc.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on December 24, 2017, 02:17:50 AM
Build Log Update 33: Ducting

Completed my ducting for the legs and arms. Used 6inch for the arms and 10inch for the legs. I simply sewed 4 way stretch or 2 way stretch spandex into  a tube that gripped around the ducting as i pulled it over it. then using some hot glue, i gluded about 1 inch over into the inside of the ducting around the rim. Then stretched it down and glued it on the other rim the same way. Then used some staples along the rim. I would have like too do it with a sewing machine but mine was too small too accommodate the 10 inch ducting.

(https://i.imgur.com/BbeDEWh.jpg)
(https://i.imgur.com/fxKk4c6.jpg)
(https://i.imgur.com/vJhqGql.jpg)
(https://i.imgur.com/bntd8j2.jpg)
(https://i.imgur.com/FiEzaIV.jpg)
(https://i.imgur.com/3p3wArt.jpg)
(https://i.imgur.com/rYI7SPk.jpg)
(https://i.imgur.com/Zz0VS7X.jpg)
(https://i.imgur.com/PT0P6iS.jpg)
(https://i.imgur.com/QWANnX1.jpg)
(https://i.imgur.com/LttaKYx.jpg)
(https://i.imgur.com/nsMFcX4.jpg)
(https://i.imgur.com/tX6IHGY.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on December 24, 2017, 02:26:35 AM
Build Log Update 34: Update photos with helmet

Here is my photo dump of the current progress of the costume. As i wait for the final order of foam, too finish up the thigh armour,
I am starting too get all the paint ready and practicing how i want it too look. Ill update shortly with the colour swatches ive done.

(https://i.imgur.com/jT9rqvv.jpg)
(https://i.imgur.com/7O60q9o.jpg)
(https://i.imgur.com/KhBSTna.jpg)
(https://i.imgur.com/zknkUae.jpg)
(https://i.imgur.com/3RZjD6R.jpg)
(https://i.imgur.com/oSWh5jq.jpg)
(https://i.imgur.com/aWAjKEM.jpg)

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on December 24, 2017, 02:34:23 AM
Build Log Update 35: Paint Testing

Below are my paint test pieces. Sealed with flexbond. Undercoat was Rustoleum Flat Iron. Then was followed up with Rustoleum Ivory Silk. All other paint is really cheap acrylic paints. Simple Black, Burnt Umber and Silver. I will probably invest in some other silver pigments and maybe some textured paint. Also some rub and buff for metal features and too make all the letters pop.

(https://i.imgur.com/yUbsqQy.jpg)
(https://i.imgur.com/3pkRcrx.jpg)
(https://i.imgur.com/TOdRMDq.jpg)
(https://i.imgur.com/bRW86ab.jpg)
(https://i.imgur.com/v6px0RH.jpg)
(https://i.imgur.com/u57sC9J.jpg)
(https://i.imgur.com/v6FwRBm.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: prev on December 24, 2017, 07:52:31 AM
Absolutely outstanding update dude.

This is very rapidly shaping up to be the best Terminator build yet. I have a LOT of catching up to do (if I ever get started...).

I'm loving the progress, keep it up!!!!!!!!
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: doomfist on December 26, 2017, 10:15:35 PM
Can not wait to see this sucker painted.   So far so awesome.
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on January 08, 2018, 03:51:04 AM
Can not wait to see this sucker painted.   So far so awesome.

Cheers mate, im about to upload some of the first painting done.

Absolutely outstanding update dude.

This is very rapidly shaping up to be the best Terminator build yet. I have a LOT of catching up to do (if I ever get started...).

I'm loving the progress, keep it up!!!!!!!!

Thanks mate. There are a few terminator builds going on within the community at the moment. Keen too see how everyone appraoches it.

Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on January 08, 2018, 04:38:18 AM
Build Log Update 36: Paint !!

Here we go team!! First parts painted !! Thigh armour plates and Back armour plate for the COD piece.

I will add to the build log all the progression photos, but i will come back and show off the techniques used and what paint i used, priming etc

(https://i.imgur.com/qidE7Bp.jpg)
(https://i.imgur.com/h5aAlRX.jpg)
(https://i.imgur.com/j5jh02g.jpg)
(https://i.imgur.com/l1Q1oS6.jpg)
(https://i.imgur.com/eMVcf87.jpg)
(https://i.imgur.com/EdacAry.jpg)
(https://i.imgur.com/udmRdwL.jpg)
(https://i.imgur.com/oWRY460.jpg)
(https://i.imgur.com/3wHYdNM.jpg)
(https://i.imgur.com/v5IKRLj.jpg)
(https://i.imgur.com/X98BhwW.jpg)
(https://i.imgur.com/XdMRVxD.jpg)
(https://i.imgur.com/4GjVXyC.jpg)
(https://i.imgur.com/VZC6wp9.jpg)
(https://i.imgur.com/DRNOEVt.jpg)
(https://i.imgur.com/HiTd4bl.jpg)
(https://i.imgur.com/qJGplsD.jpg)
(https://i.imgur.com/WvvUIlq.jpg)
(https://i.imgur.com/cacpbjl.jpg)
(https://i.imgur.com/VwkKiUn.jpg)
(https://i.imgur.com/98hE1hd.jpg)
(https://i.imgur.com/XIIyIwa.jpg)
(https://i.imgur.com/eDKZ4ex.jpg)
(https://i.imgur.com/oon2Sgs.jpg)
(https://i.imgur.com/5pr55WP.jpg)
(https://i.imgur.com/ItIzOGz.jpg)
(https://i.imgur.com/cFCmHpR.jpg)
(https://i.imgur.com/gpgbZ45.jpg)
(https://i.imgur.com/t9mlSWv.jpg)
(https://i.imgur.com/vF3FvOG.jpg)
(https://i.imgur.com/qgBHbO1.jpg)
(https://i.imgur.com/kyEfsxe.jpg)
(https://i.imgur.com/12tEwsm.jpg)
(https://i.imgur.com/2z0NsVa.jpg)
(https://i.imgur.com/cQ0VUBd.jpg)
(https://i.imgur.com/AaWvdFw.jpg)
(https://i.imgur.com/XKE7o5g.jpg)
(https://i.imgur.com/gCrU0Cl.jpg)
(https://i.imgur.com/HagziQ8.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Brother Barachiel on January 31, 2018, 05:13:49 AM
Build Log Update 37: More Paint

Hey team, long time since the last update. Been busy with work and the like but none the less still working slowly on the paint job. Ive attached a heap of photos for your perusal. Main on the Thigh Armour and a few pics of the primed boot and shin.

Weathering is by far the longest part with about 8 hours on each piece .Please enjoy the progress pics. As i said last time ill come back through here and order them all in sequence. and Let you guys know how ive done all the painting and weathering =) Pushing for a mid year finish but we will see. Still so much to do and i havent even started the assualt cannon.

(https://i.imgur.com/WCbT822.jpg)
(https://i.imgur.com/EwQJeSh.jpg)
(https://i.imgur.com/AQvy5bg.jpg)
(https://i.imgur.com/wixxaRo.jpg)
(https://i.imgur.com/BYFQLv1.jpg)
(https://i.imgur.com/pLCQOXS.jpg)
(https://i.imgur.com/KO6cgiY.jpg)
(https://i.imgur.com/KKT2zkF.jpg)
(https://i.imgur.com/Dabpvki.jpg)
(https://i.imgur.com/9hcelhN.jpg)
(https://i.imgur.com/3vnzEqe.jpg)
(https://i.imgur.com/cwfQlzS.jpg)
(https://i.imgur.com/BLNG9gg.jpg)
(https://i.imgur.com/N2xvZ3U.jpg)
(https://i.imgur.com/ExDatQU.jpg)
(https://i.imgur.com/0PHWUe0.jpg)
(https://i.imgur.com/vM34QJJ.jpg)
(https://i.imgur.com/0gbRe0q.jpg)
(https://i.imgur.com/2V0O1A9.jpg)
(https://i.imgur.com/ECHuni3.jpg)
(https://i.imgur.com/jlq1t1V.jpg)
(https://i.imgur.com/oPZ54vI.jpg)
(https://i.imgur.com/kzyRYAQ.jpg)
(https://i.imgur.com/Adhdy2I.jpg)
(https://i.imgur.com/lvvJQA3.jpg)
(https://i.imgur.com/UwmZhBl.jpg)
(https://i.imgur.com/qNGp70c.jpg)
(https://i.imgur.com/a3O8NVa.jpg)
(https://i.imgur.com/Mqt74di.jpg)
(https://i.imgur.com/HJhtA2y.jpg)
(https://i.imgur.com/ZewOdLV.jpg)
(https://i.imgur.com/4hXtyK3.jpg)
(https://i.imgur.com/39X85C0.jpg)
(https://i.imgur.com/Urr0KGe.jpg)
(https://i.imgur.com/ZVdV5Gw.jpg)
(https://i.imgur.com/bZm7hCo.jpg)
(https://i.imgur.com/KNXsxIw.jpg)
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: doomfist on February 01, 2018, 09:13:59 PM
Nice, looking sharp.  I really like your weathering technique, looks beat to hell, in a good way. 
Title: Re: Spacehulk Deathwing Brother Barachiel Build [In Progress]
Post by: Inquisitor Horvath on February 08, 2018, 01:04:36 PM
Terminator armor is rare at best, and shiny doesn't stay shiny long when you're deathwing. Keep up the good work!